80W – Vape Senior Club

Complete Guide To Innokin Coolfire Z80 Kit

This time I’m gonna introduce the Coolfire Z80 Kit by Innokin. If you are a fan of Innokin devices or an outdoor enthusiast, don’t miss out on this.

Innokin Z80 promises both great flavour and long coil life thanks to its refresh feature and F0 mode. Refresh allows you to prime the coil between uses and F0 utilises new thermodynamic heating technology to improve the flavour of your e-liquid and increase coil life. The mod is powered by an external 18650 battery (not included). The convenient external battery design means that should the battery run low, you can simply swap for a new battery and carry on vaping with no interruption. All important data including wattage and battery life is displayed on the mod’s in-built screen, The screen has a choice of two options – pro and minimalist which displays more or less detailed data depending on what you prefer.

The Coolfire Z80 kit includes a 5.5ml Innokin Zenith 2 Tank, compatible with Innokin Z coils. The wide range of coil resistances available and the choice of both a narrow and wider drip tip gives the choice of MTL or DL vaping styles depending on what you prefer. The Zenith II tank’s adjustable airflow ring also allows you to precisely control the air intake for an airier or more restricted vape and more or less intense flavour & nicotine hits.

Is VOOPOO Vinci X 2 Kit Worth Buying?

Have you used the Vinci X Kit by VOOPOO? This time we’ll be covering the VOOPOO Vinci X 2, let’s have a look at what it offers in comparison with the Vinci X…

For a start, the battery usage is the same – a single 18650 which is not included in the kit. However, this time around a USB Type C port replaces the earlier Micro USB with a faster 2A charge rate. The screen size has been increased from the 0.96in screen found on the original to a 1.08in screen which has different color themes and the screen orientation can be rotated to suit your preference. Also, the output in the 2nd version is higher at 5-80W and you can select from the Smart Mode (automatically adjusts output according to the coil installed) or RBA Mode (full variable wattage control).

In standard form the pod capacity has increased from 5.5ml to 6.5ml – but sadly for those in TPD regulated areas, this capacity is still restricted to 2ml. The original version only had 2 airflow settings which were activated by rotating the pod 180°. This time around a sliding airflow switch gives a full infinite adjustment. The chipset has also been updated to the GENE.AI 2.0. As with previous versions, this kit uses the wonderful VOOPOO PnP coils which has a resistance to suit most vapers – plus a DIY RBA if you fancy saving some money. Included in the kit are the PnP-VM1 0.3ohm coil and PnP-VM6 0.15ohm coil.

You may also like:
سعر drag x plus
swag px80 colors

Is SMOK IPX 80 Kit Versatile Enough For Different Styles Of Vaping?

As a big fan of the SMOK brand, I usually like collecting their devices. Lately, I found the IPX 80 Kit. If you want a solid device that can provide a decent vaping time, then this is worth a shot. Let’s dive in.

SMOK IPX 80 Kit is one of the most durable vape devices on the market thanks to its IPX67 rated waterproofing, dustproofing, and shock protection. Wherever you go, whatever you do, it will be able to go with you and perform. Inside the shell is a massive 3000mAh battery which should, even at 80W, be enough to last the most avid vapers all day long. If you do find yourself running out of battery life, the Type-C USB charge port has 1.4A fast charging so you can get your IPX 80 back up to full charge as quickly as can be.

Moving on to the IPX 80 RPM 2 pod, it has a generous 5.5ml vape juice capacity and is compatible with all the RPM2 coils. In the kit, you get a 0.6ohm DC MTL Coil and a 0.16ohm Mesh Coil which can cater for both MTL and DTL depending on how you configure the airflow. The airflow control system is where the real innovation takes place. Unlike most pod mod airflow designs where you get one airflow control, the IPX 80 has airflow adjustment on both sides for the ultimate throat-hit adjustment.

You may also like:
drag 3 mod price
cheap aegis pro

What Are The Features Of Vaporesso Swag PX80 Kit?

In this article, we’ll be covering the Swag PX 80 Kit by Vaporesso. It features a compact design and simple to use interface. Let’s dive in for more details.

The Swag PX80 has a solid zinc alloy chassis with elegant resin side panels, which house an improved AXON 2.0 chip. This chip allows the device to fire in 0.001 seconds within an output range of 5-80W. Another added feature is intelligent wattage detection, which allows the device to automatically select the perfect wattage output based on the ohm level. Included in the UI are wattage, voltage, and smart wattage modes. Operating the device can be done with a single firing button, dual adjustment buttons, and a 0.96″ TFT display screen. Powering the device is a removable 18650 battery which can be charged via a USB Type-C port located below the adjustment buttons.

As for the Swag PX80 pods, they can store up to 4ml of e-juice and are refilled via a bottom filling port. The most notable feature of these pods is the ability to remove the installed coil without removing the e-liquid. This can be done by twisting a ring located beneath the drip tip, flipping the pod upside-down, and pressing up on the drip tip. Each pod features a magnetic connection and has a twist to adjust the airflow system. Included in the packaging are a 0.2Ω and 0.3Ω GTX mesh coil, and the pod is also compatible with other Vaporesso PM80 coils. Anyway, the Swag PX80 is an amazing addition to have in any vaping arsenal due to its compact design and simple user interface.

You may also like:
bmor selva buy
cheap ijoy lio bee lit

Do You Really Know VOOPOO Argus X Kit?

Have you used the Argus series by VOOPOO? Today I decided to introduce the Argus X Pod Kit, and hope you guys will like it. Let’s get stuck in.

Maintaining the overall design of the Argus Pro, the VOOPOO Argus X now can accommodate a single 18650 battery to deliver an impressively stable 80W output power. Constructed from zinc alloy and combined with a delicate leather grip section, it will provide superior chassis strength. Equipped with the sought-after GENE.TT chipset at the helm, the Argus X features an intelligent Smart Mode to identify coil resistance and dial to the perfect output configuration automatically and has an extra RBA Mode to let users run wild at the wattage adjustment.

Working in conjunction with the well-received VOOPOO Drag X Tank which features supreme compatibility with all VOOPOO PnP coils, the Argus X is able to deliver a variable vaping experience. Furthermore, it is outfitted with the convenient infinite airflow adjustment system to deliver the most appealing airflow distributions for various vape enthusiasts.

You may also like:
tpp pod tank price
sigelei vpe review

What Are The Features Of Lost Vape Thelema Kit?

Are you looking for the best pod mods? Why not take a look at the Thelema Kit by Lost Vape? It will be exactly what you want, now let’s crack on for more details.

With an integrated 23600 battery which has a 3000mAh capacity, you should be able to enjoy all-day vaping with the Thelema Kit, even at the maximum 80W of power. In this way, you may achieve the boundaries of both the power from the battery and the best flavor from the mesh coils. Moreover, recharging takes place via a fast Type-C USB interface that is reversible and will top off the battery in less than 60mins thanks to a 2A fast charging current.

If you are a fan of Lost Vape devices, you may recognize the display on the Thelema Lost Vape as it looks to be identical to the previous Gemini Hybrid setup. For easy viewing and effortless adjustments, the screen displays vape data vertically and in full-color. Moreover, you may customize the theme to the following colors: blue, yellow, white, red, green, and purple. According to the manufacturer, changing the theme takes less than two seconds, and changing the power is done via two adjustment buttons underneath, starting at 5W and topping out at 80.

Each Thelema pod features an easy top filling system to ensure that adding vape juice to the huge 4mL reservoir is easy. For the best vapor output, you’ll receive two mesh coils with purchase. The first is the Ultra Boost M4 Coil with a 0.2ohm mesh heating element that fires from 40-60W. Or, you may prefer the included 0.3ohm M1 coil that is rated 30-40W and uses Clapton wire. Both of these are designed for DTL vaping and there are four more compatible coils including an RBA head. A final thing to notice about these coils is that there is an adjustable airflow control knob on the bottom to achieve your favorite setting.

You may also like:
smok nord v2
intake mtl rta review